Your FANUC Spindle Motor's Life Can Be Extended with Proper Maintenance
The best approach to make sure your FANUC spindle motor continues to function correctly when you need it is to take care of it and maintain it appropriately. It is crucial in and of itself to take the time to comprehend why it is crucial to properly repair your drives and motors. Although older equipment is unquestionably more prone to malfunction than newer equipment, modern equipment can nevertheless go wrong for a variety of reasons, including insufficient lubrication, overheating, contamination by other machine fluids, etc.
Standard Maintenance Checklist:
- Verify that no additional fluids from outside sources are flowing into the Fanuc spindle drive.
- To make sure that everything is linked properly, inspect the installation.
- Verify that the spindle is properly greased. It's hazardous to use too much or too little lubricant, so be sure to read your handbook to find out how much you should use.
- Reduced spindle drive vibration will stop any chips, cards, or wires from becoming unseated or being displaced.
- The bearings inside the spindle can be properly protected against impacts to place as little physical strain as possible on the machine itself.
By making sure your spindle drive is properly maintained by performing these actions at least once a month, you are helping yourself. You are saving money and avoiding downtime by avoiding the need to acquire new or have damaged parts fixed.
You might not always have the tools available to diagnose your motor, but we do. You don't have to worry about it since CNCTOOLSLLC provides high-quality repair services for all motors. Please visit our website to view the full list of brands and parts we can repair for you.
If you need assistance in finding the drive, motor, or servo system you require, just let us know. We have access to a worldwide supply chain network and can locate exactly what you need. We also offer a wide range of other parts and components for a variety of machines and equipment, including:
- Spindle Drives
- Spindle Drive Motors
- Monitors
- Controls
- Circuit Boards
- Power Supplies
- Rotary Tables
- Other Motors
Our qualified customer service representatives can help assist you in locating parts for your machines and equipment, provide you with a quote, and help you set up maintenance, repair, or installation services from one of our qualified technicians. To further demonstrate that you are aware of what to look for, contact us at (956) 246-7411 or send an email to services@cnctoolsllc.com if you need any further assistance